LED Traffic display screen with Graphics induced mark and traffic signs,it is a multi-function information display which is combined with traffic signs and variable message signs.
It plays an signpost role to provide the road ahead to driver by presenting a graphical outline of the whole way, in the areas of static graphics section can be embedded with LED light,with these different colors of LED light,the led screen can identify the real-time traffic with clear (green), block (red) or crowded (orange) status, so the drivers can judge and select the appropriate driving route by its traffic guidance role
Because of its intuitive, informative, short viewing time,guiding for the driver who is not familiar with the road and other significant advantages,it is popular used in main road of the city and highways network-intensive.It is applied in the exhibition center,sport stadiums, airports, docks, bus stations, streets, highways and the other place to display and advertise information.
Notes: This is the structure Chart. Parts in black are metal cube.
1: height of our cabinet 480mm, the green line is the virtual Position of the cabinet installation.
2: Width of our cabinet 480mm, the distance between two cores of two adjacent metal cubes.
3: The Metal cube on the bottom of the structure.requirements:40mm*40mm.surface smooth and in horizontal, without unevenness.
4: Square connect sheet, size: 70mm*70mm, install at the corner of cabinet.
5: Rectangular connect sheet, size: 70mm*25mm, install at the middle of cabinets.
6: It is a horizontal metal cube, Weld a horizontal metal cube every four cabinets’ height to make sure the screen is stable. The soldering position should be 60mm above the bottom line of 480mm*480mm cabinet.
Manunal of installation
1 The screen should be installed from the bottom of the structure,from the middle to both sizes,In order to keep the better effect of the led screen,please make sure that the gap between two cabinets can not be more than 1mm..
2 When finished,you can install the second row,installation is the same as the first row,but note that the cabinets from the second row should be locked in the enclosure slots which is from the first row,the gap between the first and the second row should not be more than 1mm..
3 And so on,the installation is the same as above till finish.
